• |
High volume portable sampler for the sampling of micro pollutants, IPA, PCB, pesticides and radioactive particulates with double electrical power feed: line current and battery. |
|
|
• |
Unique in its kind for transportability, compactness and versatility of utilisation |
|
|
• |
Available with sampling supports of 102 and 55 mm |
|
|
• |
Utilisable with standard 60 mm vials with polyurethane foam or XAD-2 |
|
|
• |
Magnetic induction motor and electronic flow control with venturi device conforming to the ISO-5167 norms |
• |
Power supply at 220V – AC and 24 V – DC with external PowerPackPuf battery pack |
|
|
• |
Flow range up to 400 litres per minute with automatic compensation for loss of load |
|
|
Analitica Strumenti presents its new ultra-light and high volume portable sampler for the monitoring of aerial-dispersed pollutants like IPA, PCB, dioxin, pesticides and for alpha and Beta radioactive particulates, managed entirely by microprocessor and powered by electrical line power at 220V and in Direct Current at 24 V by way of the utilisation of an external battery pack.
The utilisation of the AirCube Puf sampler is foreseen in situations of emergency for sampling of toxic substances in the air during critical, environmental events with a high risk of pollution. The option of power feed through an external battery pack allows its utilisation even in situations where electrical current is not available.
Light and compact it offers no difficulty for transport, and through a simple installation phase its utilisation is made available in minutes. During sampling phases the following information is available on the display:
-
Instantaneous sampling flow
- Average sampling flow
- Partial sampling volume
- Ambient temperature
- Atmospheric barometric pressure
- Progress of the sampling on a graphic base with automatic calculation of the standard deviation
The 102 mm filter holder support conforms to the ISO and EPA standards for IPA and dioxin sampling. With the 55 mm support it is possible to carry out the radioactive particle sampling for type alpha and Beta compounds.
Technical specifications
- Magnetic induction motor block with blower
- Electronic flow control with venturi tube device
- Programming of the sampling cycles and times by way of an electronic data card
- Memorisation of data with the possibility to see it again on the display with minimum, average and maximum values.
- Retro-illuminated plasma display
- Bi-directional RS 232 for the downloading of data and for remote GSM communication
- 102 and 55 mm interchangeable sampling supports
- Filtering membrane housing with PTFE cassettes
- Dimensions: 27x27x45 cm
- Peso Kg.9
- Electric power supply 220V-AC / 24Vcc
How to order
