| |
|
|
|
AirCube HE Portable Sampler |
|
The AirCube® HE portable constant flow atmospheric sampler is suitable for air quality monitoring applications in conformity with the norms regarding PM10, PM2.5 and TSP aerial-dispersed fine particles. The structure and modularity of the sampler allow the expandability of its utilisation in environmental applications for the monitoring of exhaust emissions. Practical and versatile, the AirCube HE sampler may be equipped with different configurations for automatic and sequential sampling.
Technical Specifications
-
High yield pump with vacuum seal from 6m3/h
- Electronically regulated constant flow with a ±2% precision
- Operational range included between 5 and 50 litres/minute
- Sample volume monitoring with integrated volumetric counter with a ±2% precision
- Sample flow monitoring with Mass-Flow device, with a ±1% precision
- Sensor for the detection of atmospheric barometric pressure and double temperature detection sensor: one for the monitoring at the counter and another for monitoring at the sampling point
- Setting and monitoring for standard deviation of sampling with interruption in the event of excessive loss of load
- Possibility of programming for different types of sampling sequences, for sample time or volume, for a single day or for up to 16 days.
- Possibility of modifying the programme conditions during the sampling phase resetting them in real time.
- Setting of the instrument controls including seal test and monitoring of magnitude measurement sensors.
- Predisposed for connection with pair of sensors for the detection of wind velocity and direction
- RS232 data port for the downloading of data from the AirNet2 software and for the connection to the serial printer
- Interface for connection with the IsoFlow 201 flow meter for the automatic monitoring of the conditions of isocinetism (Optional)
- Predisposed for utilisation with GSM/GPRS modem (modem optional)
- Sample data saving in the event of loss of current with re-initiation of the same sampling session upon return of electrical power with registration of event in the final summary
 The AirCube HE sampler is capable of satisfying the requirements foreseen by the EN-12341 and EN-14907 norms for the sampling of aerial-dispersed PM10 and PM2.5 particles under the flow conditions foreseen of 38 litres per minute and is capable of carrying out samples of emissions both in the manual mode and in automatic thanks to the possibility of connection with the isocinetic parameter meter IsoFlow 201. Simple to use, the AirCube HE sampler is managed completely by microprocessor offering the possibility to the user of setting the sampling parameters directly from the keyboard. Aspiration flow adjustment is carried out by way of a motorised proportional valve and is able to manage changes in flow with extreme rapidity and accuracy. The AirCube HE sampler is equipped with flow regulation with mass flow. This option offers maximum precision and guarantee of an extremely accurate datum referred to the sampling.
The AirCube HE sampler is capable of managing external units for PTS EV Plus sequential sampling and for PM10/2.5 fine particles, DustCheck5.
- Dimensions: 28x28x42cm (LxDxH)
- Weight: 16 Kg.
- Electrical power feed: 220V-AC
The sampler is furnished complete with Interface for sequential groups PTS, Interface for wind velocity and direction sensors (sensors not included), RS232 cable, Electrical power cable, AirNet2 software for elaboration of data, Italian language manual and calibration and inspection report.
How to order
| Product |
Code |
| AirCube™HE portable sampler |
600/A30001HE |
| GSM Interface Module for remote communications (SIM Not included) |
600/AFPUF1001GSM |
| Canopy for protection from atmospheric agents |
600/A3HS00010 |
| Portable printer |
600/SPRINTB22 |
| Interface for isocinetic parameter measurement IsoFlow 201 |
600/RSIF201X |
|
|
|
