| |
Reference methods: |
|
|
| • |
Dir.CEE 107-2004 |
|
|
| • |
ISO 12884 (Gas and Particles) ISO 16362 (Particles) |
|
|
| • |
US-EPA TO4A, TO9A e TO13A (Gas e Polveri)US-EPA TO4A, TO9A e TO13A (Gas and Particles) |
|
|
| • |
ASTM D-6209 |
|
|
| |
|
| |
Technical Features:
|
|
|
| • |
Flow range 120-600 liters/minute
|
|
|
| • |
Venturi electronic flow control system (ISO-5167) |
|
|
| • |
High resolution large display LCD backlightand RS 232 PC interface |
|
|
| • |
Sampling period are microprocessor based with standard deviation control and pressure drop check on filter |
|
|
| • |
Wind velocity and direction connection interface included (no sensors) |
|
|
| • |
Remote data handling with GSM/GPRS protocols (Optional) |
|
|
| • |
External shelder in anodized aluminium for outdoor applications |
|
|
| • |
Ambient temperature and barometric pressure detected |
|
|
| • |
Adapter kit available to convert Puf sampler in high volume PM sampler |
|
|
| • |
Class protection IP55 |
|
|
| • |
Adapter low ambient temperature kit (Max.-30°C) |
Sampling Features
The Air Flow Puf high volume sampler with the new PC electronic board allow the user to view all setting and sampling data for a full compliance sampling status. The follolwing data are available at display in a different screens:
- Selected sampling time (Max 9999 minute)
- Residual sampling time to stop
- Ambient Temperature
- Sampler cabinet temperature
- Barometric atmospheric pressure
- Sampling flow-rate
- Total sampling volume
- Total standardized sampling volume
- Sampling faults (flow or sensors readings)
- Wind velocity and direction (with optional sensors installed)
- Stored sampling data
The new microprocessor capabilities allow the user to select and store in the memory up to 3 different programs with sampling settings ready to start.Four different parameters are available on the main screen in a graphic format as Ambient Temperature, Barometric Pressure, Flowrate and Standard Deviation.
Automatic re-start after power shut-off with all data stored in the memory.
The high volume Air Flow Puf sampler is a dedicated sampling system to collect simultaneosly gas and particles in a flowrate range to 120-600 liters per minute.
Fully in compliance with all standard methods EPA, ISO, ASTM, the Puf high volume sampler is microprocessor controlled and a Venturi flow measurement system (ISO 5167 Compliance) keep the flowrate costant with a great accuracy.
Other Features
• Flow range |
120-600 lit/min |
• Pump type |
Three stage brushless motor |
• Maintenance period |
Up 20.000 hours depending on work conditions |
• Power source |
220/240 V-AC 50 Hz |
• Power Comps. (Ampere) |
15 at start / 4 during sampling procedures |
• Operative conditions |
-5° / +50°(-30°C with heating conditioning system) |
• Dimensions |
120x37x37 cm (hxlxp) |
• Weight (Kg.) |
12 Kg |
Order Codes
| Code |
Product |
600/AFPUF1001K
|
Air Flow Puf high volume sampler
|
| 600/GRMET001K |
Wind speed and direction sensor with assembly kit |
| 600/AFPUF1001GSM |
GSM/GPRS modem |
| SK225-1821 |
Quarz Fiber filters 102mm pack.25 |
| SK226-131 |
SKC Puf purified sampling tube (each) |
| SK226-129 |
SKC Puf /XAD-2 purified sampling tube (each) |
| 600/SSK001K |
Air Flow Puf Start Up Kit (Set of Filters, Puf tubes, Filter cassettes) |
| 600/SCS001K |
Heating conditioning system (Max.-30°C) |
| 600/ |
Glass tube container per Puf |
| SKP226131 |
SKC 10 pieces not purified foam |
